AC Won’t Turn On? – Troubleshooting Tips
Are you having trouble getting your air conditioner to start up? While it can certainly be frustrating, the good news is that in most cases, there is an easy-to-follow, step-by-step process for troubleshooting the problem and diagnosing its cause. If you want to know the most common culprits and to maximize the chances of getting your AC running again, here is the information you need.
Is It Just the Air Conditioner or Something Else?
The first step in troubleshooting AC problems is to make sure that it isn’t simply a power or breaker issue. One of the quickest ways to check this is to see if any of the other powered items that are in the same circuit are working. If any of them have power, the issue might be specific to the air conditioner. On the other hand, if none of them seem to be working, then it’s more likely an issue with the power.
Check the Simplest Things First
Assuming that there is power, you then want to make sure that the easy things have been checked. This includes making sure that the thermostat is on, that the air filter is clean, and that the breakers haven’t tripped. Another easy option is to just unplug the power cord and then plug it back in. This can reset some of the electronic parts in the AC unit.
Electrical Issues
In some cases, the problem is with the electrical side of the unit. The simplest of these is if the power cord or plug ends are damaged. If that is the case, the repair is straightforward and easy. Beyond that, it’s also possible that the main capacitor is damaged. Fortunately, a capacitor is cheap and easy to replace.
The Start-Up Motor
If the power levels, the cord, and the capacitor are all functioning correctly, then the problem might be with the motor. This is the component that drives the air. If it’s not working, the air won’t flow out of the unit properly. The bad news here is that a start-up motor is a complex item to diagnose and repair. It’s best to leave this task to a professional with the right tools and experience.
Problems With the Condenser Coils
If your AC stops running, it can also be an issue with the condenser coils. These are the two large coils that are located outside the house. They are responsible for recycling the cool air. Dirty coils can be cleaned and this will often allow the AC to start running again.
Refrigerant Leaks
Another potential problem is a refrigerant leak. This is one of the more serious causes of AC not turning on and it can be caused by a few different factors. If the system has a leak, it should be taken care of by a professional.
Call a Professional
It’s important to remember that troubleshooting AC problems is not a simple task. If you have exhausted the simple troubleshooting steps and the AC still won’t turn on, the best course of action is to call a professional. The repair technician will already have the right tools and experience to quickly diagnose and fix almost any type of problem.
When your AC won’t turn on, you don’t have to panic. With these tips, you can quickly work through and troubleshoot the most common causes. However, if the problem is complex or difficult to diagnose, it’s best to leave the repair work to a professional. This will help you get your air conditioner running again as quickly as possible.
If you’re still having difficulty getting your AC to turn on, contact a team of reliable and experienced appliance repair specialists from Local Reliable Appliance Repair. You can trust them to provide a cost-effective, reliable solution to get your air conditioner working again. To speak to a technician, call (866) 311-8590 today.
AC Not Turning On: Manufacturer and Technician Recommendations
Homeowners can experience a range of problems with their AC units, including instances when their AC suddenly stops working or turns off. In order to help prevent this problem from occurring, there are several preventive actions that can be taken. Here are the manufacturer and technician recommendations regarding AC not turning on and how to address the issue:
Check the Power Source
The first thing to do when an AC unit is not turning on is to check the power supply. Make sure that the breaker that controls the AC unit is switched on and that the outlets, fuses, and circuit breakers are in good condition. Additionally, ensure that the power cords are plugged in tightly.
Clean the Filter
The second thing to do when an AC unit is not turning on is to clean the filter. The filter should be cleaned on a monthly basis, as it collects dust and debris that can impede airflow. Doing so can prevent damage to the AC system and extend its life.
Clean the Condenser and Evaporator Coils
The third thing to do is to clean the condenser and evaporator coils. Over time, these coils can become dirty and covered in dust, which can reduce the air flow and make the AC less efficient. Cleaning these parts regularly can help to improve the AC performance and prevent it from turning off.
Replace the Remote Control Batteries
The fourth thing to do when an AC unit is not turning on is to replace the remote control batteries. This will help to ensure that the remote control is functioning properly.
Check the Thermostat Settings
The fifth thing to do when an AC unit is not turning on is to check the thermostat settings. Make sure that the thermostat is set to the correct temperature and that the mode is set to cooling.
Contact a Professional HVAC Technician
Finally, if all else fails, it is a good idea to contact a professional HVAC technician. A technician can diagnose and repair the issue, and can offer additional advice and guidance on the best ways to maintain and extend the life of the AC unit.
Taking the above steps can help to prevent AC not turning on issues and ensure that the unit runs efficiently and effectively. If in doubt, it is always a good idea to contact a professional HVAC technician for assistance.
Average Repair Cost for AC Not Turning On
In order to figure out the average repair cost for an AC not turning on issue, there are a few factors to consider, such as the parts necessary, the difficulty of the repair, and the current market prices. The minimum repair or installation cost in a city such as California tends to be around 20% higher due to the higher cost of living.
Parts that might be necessary include but are not limited to a condenser coil, capacitor, contactor, air handler fan, blower fan, and thermostat. Depending on the difficulty of the repair and the amount of parts necessary, the repair cost can range from $50-$500.
For complex installations, the cost of materials should be taken into consideration. The cost of materials can range from $50-$500, and might include things such as refrigerant, materials for ductwork, or pipefitting supplies.
In order to get the best professional advice on the average repair cost for an AC that is not turning on, it is best to call a local and reliable air conditioning & heating contractor such as Local Reliable Air Conditioning & Heating at (866) 311-8590. They will be able to provide exact pricing and explain the repair/installation process in-depth, as well as provide any details and cost of materials that may be necessary.
Have an AC Not Turning On? Let Reliable Air Conditioning & Heating Help!
Are you having AC troubles? Reliable Air Conditioning & Heating is here to help! As a locally-owned California company, Reliable provides same-day appliance and HVAC repair and installation services. Our experienced technicians have five or more years of experience, so you can be sure your unit is being serviced by true professionals.
At Reliable, we understand the frustration of having an AC not turning on. That’s why we’re here to help. Our technicians can quickly identify the problem, provide a fair and affordable assessment of the repair costs, and get you up and running in no time. Plus, all our repairs come with a 90-day warranty, so you can have peace of mind that your AC unit is running smoothly.
Experience why so many Californians trust Reliable Air Conditioning & Heating. We offer same-day services and no-obligation quotes, so you never have to wait long to get your AC unit running again. With licenses and insurance, you can rest assured that you’re always getting high-quality, reliable service.
Don’t let your AC worries linger; contact Reliable Air Conditioning & Heating today and let us help you get your air conditioner running again!
FAQs: AC Won’t Turn On? – Troubleshooting Tips and AC not turning on
What causes AC not to turn on?
A variety of factors can cause your AC not to turn on, such as a tripped circuit breaker, a faulty thermostat, a damaged compressor, leaks in the refrigerant or cooling lines, or a broken fan motor.
What should I do if my AC won’t turn on?
If your AC won’t turn on, start by checking the basics, such as your circuit breaker and thermostat settings. If those are in order, contact an experienced appliance repair technician to diagnose the problem and make the necessary repairs.
What should I look out for if my AC won’t turn on?
When troubleshooting, look out for any signs of damage, such as corrosion on the wiring or loose connections, which could signal that the repair job is more serious than previously thought. A certified technician will be able to diagnose and fix the issue efficiently.
What should I do if my AC stops working?
If your AC stops working, you should first determine the cause of the problem. Check your circuit breaker and thermostat settings and inspect the unit for any signs of damage. If you can’t find the root of the issue, contact a certified technician to come to your home and diagnose the problem.
Can I fix my AC if it won’t turn on?
In some cases, you may be able to fix the issue on your own. However, due to safety concerns, it is recommended that you consult an experienced appliance repair technician for AC problems. An experienced technician can inspect the unit, make necessary repairs, and give you advice on future preventative maintenance.
If you need help with a broken AC that won’t turn on, call Local Reliable Appliance Repair at (866) 311-8590 for a speedy and professional repair.