Air Conditioner Repair & Installation Services

Reliable AC & Heating: CAll (866) 311-8590

AC Blowing Air But Not Cold After Power Outage? Here's What To Do

AC Blowing Air But Not Cold After Power Outage? Here’s What To Do

AC Blowing Air But Not Cold After Power Outage? Here’s What To Do

A power outage can cause disruption to most household’s daily life, especially when it comes to air conditioning. During a power outage, the air conditioning unit may not be able to get back to normal once the power is restored. If your AC unit is blowing air, but the air is not cold, here’s what you need to do to troubleshoot and restore your AC’s optimal performance.

Check Circuit Breaker

Assuming your AC unit was turned off before the power outage, turn off the power supply to the AC at the circuit breaker. Wait for 5 to 10 minutes and then switch the breaker on again. If the air conditioner is still not cooling upon restart, double check that you have selected the cooling mode on the thermostat.

Clean or Replace Air Filters

If restarting the power did not rectify the problem, then it could mean that the air filters on the unit are clogged, dirty or damaged. This can prevent the unit from cooling the air optimally. Clean the pre-filters with a vacuum and then use mild detergent and water mix to clean the panel filters. If the filters are beyond repair, then you need to replace them with new ones.

Evaluate the Refrigerant and Condensate Lines

To maximize the cooling efficiency of your air conditioning system, regular inspection of the refrigerant and condensate lines is important. If the refrigerant lines are too long, it can reduce the pressure and eventually decrease the cooling power of the unit. If you notice any curved lines, kinks, or pinching, they need to be straightened out. Similarly, the condensate line needs to be inspected for clogs. If you note any blockage, clear the line before you move on to the next step.

Look at the Compressor

If all the lines and filters are okay, then it’s time to move on to the compressor. For this, you need the help of a licensed HVAC technician to detect and resolve any issues with the compressor. If it needs replacing, they can help you with that too.

Call Local Reliable Appliance Repair

The diagnosis and repair of your AC unit after a power outage requires careful inspection and attention to details. If the above steps do not rectify the issue or make your air conditioning unit run efficiently, it is recommended to call a reliable appliance repair service like Local Reliable Appliance Repair at (866) 311-8590. The team of HVAC professionals is prepared to diagnose and repair your AC and get it running perfectly again.

Don’t take the risk of trying to fix it yourself if you’re not sure of what you’re doing; call Local Reliable Appliance Repair to get your AC unit back to optimal performance after a power outage.

AC Blowing Air But Not Cold After Power Outage? Here's What To Do
AC Blowing Air But Not Cold After Power Outage? Here's What To Do
AC Blowing Air But Not Cold After Power Outage? Here's What To Do

AC Blowing Air but Not Cold After Power Outage: Manufacturer Recommendations, Local Appliance Companies’ & HVAC Technician’s Advice

When power outages affect your air conditioning unit, it’s imperative to take the necessary action to avoid any further problems. It’s not uncommon for many people to find their AC blowing out warm air, leading to an uncomfortable and stuffy environment. In order to ensure a functioning air conditioning system throughout various challenges, here are manufacturer recommendations, local appliance companies’ advice, and HVAC technician’s recommendations to avoid AC blowing air but not cold after a power outage:

Manufacturer Recommendations

  • Always check the filters. Dust and particles easily accumulate in the filter, restricting air flow and preventing cold air from travelling throughout the system. Change the filter periodically to maintain air flow.
  • Check circuit breakers. After a power outage, circuit breakers are sometimes triggered and need to be reset. If standard power outlets in the home are working, then the circuit breaker should be fine. Check the breakers but refrain from tampering with them if unsure.
  • Inspect the power cords. Check any cable, cord, and wire connected to the system. If they’re burnt or warn, they should be replaced by qualified professional.

Local Appliance Companies’ Advice

  • Calibrate the thermostat. Most times after a power outage, the thermostat needs to be reset. Ensure it’s calibrated and turning on during the correct times.
  • Remove any interrupter. Sometimes, dust and pet fur accumulate in the unit, blocking the vents and reducing the chances of cooling. Clean the vents and clear out any obstruction that could be limiting airflow.
  • Call a Local Reliable Air Conditioning & Heating (866) 311-8590. If all else fails and the AC still isn’t providing cold air on a consistent basis, it’s best to contact a local reliable repair service for an in-depth inspection.

HVAC Technician’s Recommendations

  • Review your refrigerant levels. The refrigerant of the AC unit should never vary, so if the AC is blowing warm air, it’s essential to check its refrigerant levels. Ensure the right amount is being used and call a certified technician if anything seems off.
  • Inspect vents and pipes. Occasionally, connections between the vents and pipes won’t be properly installed. This can lead to warm air being produced more quickly than it dissolves. So, make sure that all connections are secured and properly tight.
  • Check the compressor. The final step should be to check the compressor. Cool air should be emitted from the compressor, and if it’s not, the compressor may need to be replaced or serviced.

When a power outage affects your AC unit, it’s necessary to take the necessary steps to avoid future problems. Above are manufacturer recommendations, local appliance companies’ advice, and HVAC technician’s recommendations to keep your AC functioning correctly after a power outage. Check the filter, wires, circuit breakers, thermostat, and refrigerant levels to ensure cool air circulates throughout the home. If all else fails, contact a local reliable repair service for an in-depth inspection.

Average Repair Cost for AC Blowing Air but Not Cold After Power Outage

Depending on the type of AC system, the average repair or installation cost after a power outage can be upwards of 20% more than usual due to the complexity of the situation. Parts that may need to be replaced or serviced include the compressor, fan motor, filter, ductwork, belts, air handler, evaporator coil, and condenser coil.

For complex repair or installation in the city of California, a reliable air conditioning and heating service should be called to ensure the job is done correctly and cost-effectively. For a minimum cost AC repair, the contractor can inspect the system and check the condition of any of the potentially necessary parts.

Depending on the part, the costs of materials can vary widely. Compressors and fan motors tend to be the more costly investments, while belts, filters, and ductwork are a bit more affordable. The cost of installation or repair can also depend on how worn the part is and how difficult it is to completely switch it out.

If you think you are facing such a situation, it is best to look for reliable local air conditioning and heating services. Click below to directly call Local Reliable Air Conditioning & Heating at (866) 311-8590 for a free quote.

Local Reliable Air Conditioning & Heating: (866) 311-8590

Why Choose Reliable Air Conditioning & Heating?

When your AC suddenly stops working after a power outage, it can be quite a stressful experience. That’s why Californians trust Reliable Air Conditioning & Heating for their appliance repair needs. A family-owned business, Reliable is committed to providing customers with same-day services, fast and affordable solutions and most importantly, reliable technician services.

Reliable Air Conditioning & Heating offers unbeatable service from highly trained technicians who have the minimum of five years of experience in the industry. When it comes to AC blowing air but not cold after a power outage, their personnel are well-equipped to diagnose and repair the issue. Reliable prides itself on fair and affordable pricing as well as a 90-day warranty on all repair services.

For appliance and HVAC repair and installation needs, don’t hesitate to contact Reliable Air Conditioning & Heating. Thanks to their decades of experience, passionate staff, same-day services and warranty, their customers can rest assured that their appliance needs are in the right hands.

FAQ – AC Blowing Air But Not Cold After Power Outage? Here’s What To Do

What to do when AC is blowing air but not cold after a power outage?

If you’re encountering this issue after a power outage, the first step is to check the breaker switch and reset it if necessary. If the breaker was tripped, once you reset it, the AC should start cooling the air normally.
If the breaker wasn’t tripped, then you may need to inspect the thermostat and check if it’s working properly. If the issue persists, it’s best to contact an expert.

Could this issue signify a serious malfunction?

In some cases, this may indicate that something is wrong with the AC system. It could be a faulty compressor, a leak in the refrigerant, clogged air filters, etc. As such, it’s best to contact a professional for help.

Are there any costs associated with AC repair?

The cost depends on a variety of factors, such as the severity of the repairs, the model and age of your AC unit, and so on. Generally, you can expect to pay around $50 for an average service call. If the repair is minor or involves the thermostat, the repair should not be too costly.

Is it possible to fix the AC myself?

Yes, if the issue is minor, such as if the thermostat is the problem. However, it’s always recommended to contact a professional to avoid any potential risks associated with working with the AC.

In conclusion

When it comes to AC repair, it’s always best to seek assistance from an expert. If your AC is blowing air but not cold after a power outage, check the breaker and thermostat first. If the issue persists, contact a reliable appliance repair service such as Local Reliable Appliance Repair at (866) 311-8590.

Leave a Reply

Your email address will not be published. Required fields are marked *