Understanding SEER Ratings for Goodman AC Installation
SEER stands for Seasonal Energy Efficiency Ratio, and it’s a measure of how much cooling and heating a Goodman air conditioning unit produces per kilowatt of electricity used. Many homeowners rely on SEER ratings to help them decide which Goodman air conditioning unit is right for their home, as these ratings can offer insight into the cost savings an AC unit can provide.
In this article, we’ll take a look at what SEER ratings are, how to understand them, and the different types of Goodman AC units available that offer energy efficiency. We’ll also provide information on how to calculate SEER ratings, as well as answers to some common questions about Goodman AC Installation.
What is SEER?
The SEER rating is a metric used to compare the cooling efficiencies of different Goodman air conditioners. The figure is expressed as a number, and is measured over the course of a cooling season, or a typical summer or winter. A higher SEER rating indicates a higher efficiency and can result in lower energy bills for homeowners.
Goodman air conditioners use special technology to control the air streams generated inside the unit so that energy usage is kept to a minimum. This technology allows for various settings which can be adjusted to suit different climates and maximize energy efficiency.
How SEER Ratings are Calculated
When determining the SEER rating of a Goodman air conditioning unit, the system utilizes a formula which combines the output of the unit in British thermal units (BTUs) with the amount of energy used over a period of time in watt-hours. This allows for comparison of energy efficiency between different models of air conditioners.
The higher the BTU output per watt, the higher the SEER rating; this indicates an efficient product. Goodman air conditioners usually carry a SEER rating between 12 and 21, but many of their newer models come with higher ratings of up to 25.
Types of Goodman Air Conditioners
Goodman air conditioners come in a variety of models, each of which offer different features and energy efficiency. Some of the most popular models include:
Central Air Conditioners
Central air conditioners are Goodman’s most popular type of air conditioner and are designed to cool an entire house. They are typically installed outdoors near the home, but can also be built into the walls.
Central air conditioners come in a variety of sizes and feature reverse cycle cooling and heating. Goodman central air conditioners have a SEER rating of 18 or higher, making them energy efficient and cost-effective.
Ducted Air Conditioners
Ducted air conditioners are a type of air conditioner that can be tied into an existing duct system in a home. They are often used to supplement central air conditioning units and can be located anywhere in the home, such as the attic or basement. This type of air conditioner has a SEER rating of up to 25, making them the most energy-efficient of Goodman’s air conditioner models.
Window Air Conditioners
Window air conditioners are portable air conditioners that can be placed in any window or wall. They are usually smaller than other types of air conditioners and are designed to cool single rooms or small areas.
Goodman window air conditioners come with adjustable settings, allowing for better control of temperature, airflow, and energy consumption. Window air conditioners usually have a SEER rating of 10-14.
FAQs for Goodman Air Conditioner Installation
What size air conditioner should I install?
When it comes to choosing the right size Goodman air conditioner for your home, it is important to consider the size of your home, the number and type of rooms, and the local climate. Too small an air conditioner can lead to inefficient cooling, while too large a model can cause higher energy bills.
It is recommended that you contact a certified HVAC technician for assistance in determining the best size air conditioner for your home.
Is installation of a Goodman air conditioner costly?
Goodman air conditioners are usually not overly expensive to install, although the cost can vary depending on the model and the area of installation. It is recommended that you get an estimate from a professional before installation to get an accurate idea of the cost.
Installing a Goodman air conditioner is a great way to ensure energy efficiency and save money in the long run. It is important to understand the basics of SEER rating and the different types of air conditioners available, in order to make an educated decision that suits your home.
For assistance with selecting the right size Goodman air conditioner and determining the cost of installation, contact your local reliable appliance repair service at (866) 311-8590. They can provide expert advice to help you make the best choice for your home.
Goodman AC Installation: Tips to Avoid Issues
Installing a Goodman air conditioning (AC) unit can be a straightforward process. But to ensure your Goodman AC works at an optimal level, there are preventive measures to consider. Here are a few tips from manufacturer recommendations, local appliance companies and HVAC technicians for avoiding any issues when installing Goodman ACs.
Use the Right Tools and Address Air Flow
Prior to installation, it’s important to make sure you are adequately equipped with the right tools to get the job done. After gathering all the necessary tools, check that there is adequate air flow for the AC unit. This includes inspecting the area for debris, correctly placing air filters and making sure the AC’s blower margin aligns with the duct connection.
Proper Electrical Hook-Ups
Before beginning the Goodman AC Installation, double check to make sure all electrical hook-ups are done correctly and up to code. This includes making sure the electrical wires are connected to the right terminals and are fastened perfectly. Before powering on the system, inspect that all the wiring and connections are done correctly. In addition, it is also important to make sure that the electrical supply current matches the Goodman AC’s power rating.
Seal All Ventilation Openings
Once the electrical hook-ups are complete, you’ll want to make sure all ventilation openings are properly sealed. This will prevent any dust, dirt and other debris from entering the system, which could make it difficult for the Goodman AC unit to function correctly. To seal these areas, use professional grade duct tape, foam insulation, weatherstripping or mastic sealant.
Inspect the Contactor & Refrigerant Pipe
Before powering on the Goodman AC, check the contactor to ensure it’s properly connected. This will help make sure the AC unit receives a proper electrical connection. Additionally, inspect the refrigerant pipe to make sure it’s connected securely and there aren’t any sign of leaks.
Perform Final Checks
Once all the steps above have been completed, double check your work to make sure it was properly done. According to Goodman, technicians should verify all electrical connections and clearances, rivet wire connectors securely and inspect the installation for compliance with local code. If everything passes inspection, you can go ahead and power on the Goodman AC unit.
If you’re having any difficulties with your Goodman AC installation, contact a local reliable air conditioning and heating company for assistance. They will be able to help you resolve any issues you may be experiencing and provide expert maintenance advice. With the right advice and careful installation, you can rest assured your Goodman AC will be running at full capacity.
Average Cost of Goodman AC Installation
On the cost of Goodman air conditioning installation, one must consider several elements in order to get the most accurate estimate. The installation cost will depend on the complexity of the job, the location/city, and the current market rate. The minimum installation cost in California is approximately 20% higher than it was before.
Below are several items that may need to be taken into account when calculating the cost of Goodman AC installation:
- Labor Cost
- Type of equipment
- Fees and Permits
- Refrigerant and Connectors
- Thermostat
- Installation Stands
- Wiring and Electrical Hookups
Additionally, local taxes and any other possible related costs must be taken into consideration.
For the best professional advice on Goodman air conditioning installation, contact Local Reliable Air Conditioning & Heating at 866-311-8590. They provide comprehensive quotes on installation jobs and will empower customers to get the optimal solution for their needs.
Experience the Benefits of Reliable Air Conditioning & Heating
Reliable Air Conditioning & Heating is the premier source for Goodman AC Installation in California. As a family-owned company, Reliable is committed to providing customers with the best-quality services at an affordable price.
Our experienced technicians ensure that each job is done correctly and efficiently, with a minimum of five years of experience in the field. We handle Goodman AC Installation jobs and offer same-day services. Our staff is licensed, insured and highly knowledgeable when it comes to all types of HVAC repairs and installations.
At Reliable, we guarantee a 90-day warranty on all repairs and installations. This is our commitment to you that we stand behind our work and take care of any future issues that may arise.
We understand the importance of having reliable air conditioning and heating in your home, so that you can enjoy comfortable temperatures year-round. That is why we strive to provide services that are timely, economical and reliable. With reliable service, you can relax with the assurance that your system is working correctly and efficiently.
When it comes to Goodman AC Installation, no other company can match Reliable. We provide customers with a one-stop-shop for all of their heating and cooling needs. The combination of our experienced technicians, same-day services, and 90-day warranty, proves that we are the best choice for your Goodman AC installation needs.
Call us today to take advantage of our quality service and experience the benefits of reliable air conditioning and heating for yourself.
FAQ: Understanding SEER Ratings for Goodman AC Installation
What is SEER rating?
The Seasonal Energy Efficiency Ratio (SEER) is a measure of an air conditioner’s cooling efficiency over an entire cooling season, calculated by dividing the total cooling output of an air conditioner over a typical season by the total amount of electric energy consumed.
What are the benefits of higher SEER rating?
Higher SEER ratings offer the homeowner improved energy efficiency, leading to cost savings over time. Additionally, higher SEER ratings are often connected with quieter performance, improved air flow, and longer system lifespan.
Does Goodman have AC models with higher SEER ratings?
Yes, Goodman offers a variety of units with SEER ratings up to 19, allowing you to do your part for energy conservation, while also remaining within your budget.
What are some tips for saving money with Goodman AC installation?
There are a variety of ways to save money with Goodman AC Installation. When considering replacement, it’s important to select the same size and type of AC unit that is being replaced. Consider getting energy-efficient certifications and taking advantage of local tax rebates or energy provider incentives, as well as any promotions Goodman may be offering.
What’s the best way to get Goodman AC installation?
Professional Goodman AC installation is the ideal solution to ensure the safe, efficient, and reliable operation of your system. For experienced, reliable assistance, call Local Reliable Appliance Repair at (866) 311-8590.