Air Conditioner Repair & Installation Services

Reliable AC & Heating: CAll (866) 311-8590

Central AC not turning on? Troubleshoot with these tips

Central AC not turning on? Troubleshoot with these tips

Central AC not Turning On? Troubleshoot with These Tips

When dealing with a central air conditioning (AC) not turning on, there are many possible sources of the problem. Knowing what to check and how to troubleshoot can make the difference between a quick and easy fix and a costlier repair down the road.

Check the Circuit Breaker

The first thing to do when your AC isn’t turning on is to check the circuit breaker. Make sure that the breaker wasn’t tripped. To reset the breaker, you’ll need to push the switch on the breaker from the “Off” to the “On” position. Then wait for a few minutes to see if the AC kicks on. If the AC still won’t turn on, you may have an electrical problem, so it’s best to call an electrician or an HVAC contractor.

Check the Thermostat

If the breaker is switched on, then you should check the thermostat to make sure it’s properly working. If the thermostat isn’t accurate, it won’t be able to accurately detect when you want the unit to turn on. Start by replacing the batteries if necessary. Then set the thermostat to a lower temperature than the current ambient temperature in the room. If the unit doesn’t turn on, then it could be due to wiring issue between the thermostat and the AC unit. If this is the case, then it’s best to call a professional repair service.

Check the Cleanliness of the Air Filter

If none of the above steps have worked, then the problem might be due to a blocked air filter. The filter should be checked at least once a month and should be replaced regularly or cleaned if it is reusable. To check the air filter, simply remove it from the indoor unit and inspect it. If the filter is clogged with dirt or debris, then it’s best to replace it with a new one. If the filter looks clean, then replace it and try turning the AC on again.

Check for Wiring Issues

If the air filter is clean and in good condition, then you should next check for wiring issues. Start by opening the control board in the indoor unit and inspect for any disconnected or frayed wires. Make sure all wires are properly connected and properly secured. If you find any damage or loose wires, it’s best to call a professional repair service as a loose wire can cause safety issues and short-circuit the system.

Check the Power Supply

The last thing to do is to inspect the power supply to make sure the AC is getting power. For this, you’ll need to check the wiring between the AC and the power supply. Make sure the power cable is properly connected to the unit, and the voltage is correct. You should also check that the power switch is in the “On” position.

If all of the above steps have been taken and the AC still isn’t turning on, then the problem is likely due to an internal malfunction and needs to be serviced by a professional. In this case, it’s best to call a reputable and reliable service professional who is qualified to provide the necessary repairs.

At Local Reliable Appliance Repair, we specialize in providing fast, effective and affordable repairs for central air conditioners. With more than 25 years of experience, our technicians are well-equipped to diagnose the issue and provide the necessary repairs. No matter the issue, we’ll always strive to get your AC back in working condition in no time. For your AC repair needs, call us at (866) 311-8590 for an appointment today.

Central AC not turning on? Troubleshoot with these tips
Central AC not turning on? Troubleshoot with these tips
Central AC not turning on? Troubleshoot with these tips

Central AC not Turning On: Preventive Action to Avoid Issues

As summer approaches, it is important to ensure that your central AC is working properly, as experienced issues can leave you and your family feeling uncomfortable and frustrated. Fortunately, preventive action can help you avoid running into any unforeseen troubles down the road. Here are some recommendations from manufacturers, local appliance companies, and HVAC technicians that can help you avoid issues with your Central AC not turning on.

Change the Air Filter Regularly

One of the most important preventive actions you can take is to regularly and frequently change the air filter in your central AC system. This is especially important if you live in an area with frequent dust and dirt, as a clogged air filter can reduce the efficiency and effectiveness of your AC system. Most air filters should be changed every three months.

Have a Professional Check Up Annually

Having a professional check up and assessment of your AC system annually is highly recommended. This will allow a technician to diagnose and repair any potential issues before they become more complicated and more difficult to fix. A professional check up can also help with preventative maintenance to ensure your AC system is running properly and efficiently.

Make Sure Air Vents and Registers are Open

Air vents and registers should never be blocked or restricted, as this can prevent air from properly flowing through the system. If air is not able to flow, it can lead to the AC failing to turn on or other issues. Make sure that all of the vents and registers are completely open and unobstructed.

Improve Airflow with Routine Cleaning

Routinely cleaning your central AC system can help to improve airflow and increase its efficiency. This includes cleaning the air conditioner coils on the outside of the unit, as well as the evaporator coil on the inside. It is also important to ensure that the environment around the indoor unit is regularly kept clean and free of debris.

Purchase Energy-Efficient Equipment

When selecting an AC system, it is important to consider energy efficiency. Energy efficient systems generally use less electricity and have lower running costs, which can help to reduce overall operating costs. Additionally, they often have improved performance and are more reliable than non-energy efficient models. When selecting a new AC system, make sure to consult with a professional technician who can help guide you in the right direction.

Use Coverings for Outdoor Units

Outdoor air conditioner units should typically be covered or shielded from the elements. If exposed, the unit is more likely to experience disruption from the sun, wind, and rain. Using a cover can help to protect the system and make it more likely to run smoothly and last longer.

Taking preventive action is an important step in avoiding any issues with your central AC not turning on. By following the recommendations of manufacturers, local appliance companies, and HVAC technicians, you can ensure that your system is working properly and is well maintained. Changing the air filter regularly, having an annual professional check up, keeping vents and registers open, improving airflow with routine cleaning, purchasing energy-efficient equipment, and using coverings for outdoor units can all help to ensure that your central AC is not only running optimally but is also able to turn on when needed.

Average Repair Cost for Central AC Not Turning On

When you have an issue with your central air conditioning not turning on properly, it can be difficult to know the exact cost of repair. There are several parts which could be the cause of the problem, and the average repair cost in California could range from a minimum of $50 up to a higher and more complex installation cost of $10,000 – $15,000, even when prices are inflated by 20%.

To better understand the potential repair costs, it’s important to factor in the cost of any part replacements that may be necessary. These could include but are not limited to:

  • Condenser Unit ($500 – $3,500)
  • Compressor ($500 – $3,500)
  • Evaporator Coil ($400 – $1,600)
  • Freon Refill ($200 – $800)
  • Fan Motor ($200 – $800)

In some instances, additional materials may be necessary – such as electrical wiring, insulation, or insulation tape – which could drive up the cost of repair. To get a thorough assessment of what the repair will entail, it’s important to contact an experienced and qualified contractor who can visit your property, identify the issue, and provide the necessary mitigation or repair.

For a reliable and professional, cost-effective repair, contact Local Reliable Air Conditioning & Heating at (866) 311-8590.

Dealing with a Central AC Not Turning On

When your Central AC isn’t working, you want fast and reliable service from an experienced contractor. California Reliable Air Conditioning & Heating is a family-owned company offering same-day service for any appliance and HVAC repair or installation needs. Our technicians have a minimum of 5 years experience and are fully licensed and insured.

We understand the frustration of dealing with a Central AC not turning on, so we offer fair and affordable pricing. Our technicians will provide a full diagnosis and work quickly to find a solution that fits your needs and budget. We also offer a 90-day warranty on all repairs.

Our top priority is always customer satisfaction. We value our relationship with each customer and strive to provide the best service possible. When you choose California Reliable Air Conditioning & Heating, you can rest assured that your service will be completed quickly and with precision.

For your peace of mind and convenience, we offer same-day service and free estimates. We understand the importance of having your Central AC working in order to ensure comfort and safety.

When you’re dealing with Central AC not turning on, don’t hesitate to call California Reliable Air Conditioning & Heating! Our experienced technicians are available to help you solve your problem as quickly as possible. Contact us today for fast, reliable service and the peace of mind that comes with knowing your HVAC needs are being taken care of.

FAQ: Central AC Not Turning On

What can cause my central AC to not turn on?

An inability to turn on can be caused by a variety of issues. These include loose power connections, a blown fuse, thermostat malfunction, shorted contactor, bad condenser fan motor, and/or a lack of refrigerant.

What can I do to help troubleshoot the situation?

To start, check to see if the power is functioning by checking the breaker or fuse. Make sure all power connections are securely connected and ensure unit’s air intake is clear. Additionally, ensure that the thermostat is set at the proper setting (cool hours and heat hours should be set correctly).

How can I tell whether the issue is within the thermostat?

If the thermostat is powered and other components of the system are functioning, the issue is likely within the thermostat. To further test this, try replacing the batteries in the thermostat or resetting it.

Does a loud sound point to a certain issue?

Yes, if the AC is making an unusually loud clicking or buzzing sound, then it may be due to a shorted contactor. This is essentially a switch for the compressor and fan motor and can be replaced relatively easily.

Should I contact a professional?

If troubleshooting the situation does not resolve the issue or if the cause is unknown, it is best to contact a professional. Issues related to refrigerant or a faulty compressor typically require professional services. For trusted service, contact Local Reliable Appliance Repair at (866) 311-8590.

Leave a Reply

Your email address will not be published. Required fields are marked *